Synthesis of new zeolites involving organic molecules relies heavily on the trial-and-error approach, because it is difficult to interpret the determining effects of organics on zeolite crystal symmetry. Here, the intrinsic relationships among the space-filling of organics, included volume of channels, and zeolite crystal symmetry, are systematically demonstrated by experimental and computational means. Under controlled conditions, the dimer and monomer organics of 1-ethyl-3-methylimidazolium selectively direct different, but related, germanosilicates, the ECNU-16 with a new topology and the existing IM-16 with the UOS topology, respectively. The comprehensive computational study reveals that the zeolite phase selectivity is determined by the unique space-filling behavior of the dimer and monomer organics, which is closely correlated to their rotation freedom, as well as the included volume of host zeolite channels. The elucidation of this crucial space-filling effect from the fundamental viewpoint will provide new guidelines for the rational design and synthesis of new zeolites in future.

Nanoscale metal–organic frameworks (nMOFs) have shown tremendous potential in cancer therapy and biomedical imaging. However, their small dimensions present a significant challenge in structure determination by single-crystal X-ray crystallography. We report here the structural determination of nMOFs by rotation electron diffraction (RED). Two isostructural Zr- and Hf-based nMOFs with linear biphenyldicarboxylate (BPDC) or bipyridinedicarboxylate (BPYDC) linkers are stable under intense electron beams to allow the collection of high-quality RED data, which reveal a MOF structure with M₁₂(μ₃-O)₈(μ₃-OH)₈(μ₂-OH)₆ (M = Zr, Hf) secondary building units (SBUs). The nMOF structures differ significantly from their UiO bulk counterparts with M₆(μ₃-O)₄(μ₃-OH)₄ SBUs and provide the foundation for clarifying the structures of a series of previously reported nMOFs with significant potential in cancer therapy and biological imaging. Our work clearly demonstrates the power of RED in determining nMOF structures and elucidating the formation mechanism of distinct nMOF morphologies.

Electron crystallography is complementary to X-ray crystallography. Single crystal X-ray diffraction requires the size of a crystal to be larger than about 5 × 5 × 5 μm³ while a TEM allows a million times smaller crystals being studied. This advantage of electron crystallography has been used to solve new structures of small crystals. One method which has been used to collect electron diffraction data is rotation electron diffraction (RED) developed at Stockholm University. The RED method combines the goniometer tilt and beam tilt in a TEM to achieve 3D electron diffraction data. Using a high angle tilt sample holder, RED data can be collected to cover a tilt range of up to 140^o. 

Here the crystal structures of several different compounds have been determined using RED. The structure of needle-like crystals on the surface of NiMH particles was solved as La(OH)₂. A structure model of metal-organic layers has been built based on RED data. A 3D MOF structure was solved from RED data. Two halide perovskite structures and two newly synthesized aluminophosphate structures were solved. For those beam sensitive crystals characterized here, sample cooling down to -170^oC was used to reduce the beam damage. The low temperature not only reduces electron beam damage, but also keeps the structure more stable in the high vacuum in a TEM and improves the quality of the diffraction data. It is shown that cooling can improve the resolution of diffraction data for MOFs and zeolites, for samples undergoing phase changes at low temperature, the data quality could be worse by cooling. In summary, cooling can improve the ED data quality as long as the low temperature does not trigger structural changes. 

SCM-14 (Sinopec Composite Material No. 14), a new stable germanosilicate zeolite with a 12 x 8 x 8-ring channel system, was synthesized using commercially available 4-pyrrolidinopyridine as organic structure-directing agents (OSDAs) in fluoride medium. The framework structure of SCM-14 was determined using rotation electron diffraction (RED), and refined against synchrotron X-ray powder diffraction (SXPD) data for both as-made and calcined materials. The framework structure of SCM-14 is closely related to that of three known zeolites: mordenite (MOR), GUS-1 (GON), and IM-16 (UOS). SCM-14 has the same projection as that of mordenite and GUS-1 when viewed along the 12-ring channels, and possesses two more straight 8-ring channels running perpendicular to the 12-ring channels. The structure of SCM-14 can be constructed by either the same layers as that of GUS-1 or the same columns as that of IM-16. Based on their structural relationship, three topologically reasonable hypothetical zeolites were predicted.

The synthesis of two dimensional (2D) materials from transition metal oxides, chalcogenides, and carbides mostly involve multiple exfoliation steps in which hazardous solvents and reagents are used. In this study, hydrated vanadium pentoxide (V2O5 center dot nH(2)O) nanosheets with a thickness of a few nanometers were prepared via a facile environmentally friendly water based exfoliation technique. The exfoliation process involved refluxing the precursor, vanadium dioxide (VO2(B)), in water for a few days at 60 degrees C. The proposed exfoliation mechanism is based on the intercalation/insertion of water molecules into the VO2(B) crystals and the subsequent cleavage of the covalent bonds holding the layers of VO2(B) together. The thermal and chemical analyses showed that the approximate chemical composition of the nanosheets is H0.4V2O5 center dot 0.55H(2)O, and the percentage of V-V content to that of V-IV in the nanosheets is about 80(3)% to 20(3)%. The exfoliated aqueous suspension of the V2O5 center dot 0.55H(2)O nanosheets was successfully deposited onto multi-walled carbon nanotube (MW-CNT) paper to form free-standing electrodes with a thickness of the V2O5 center dot 0.55H(2)O layer ranging between 45 and 4 mu m. A series of electrochemical tests were conducted on the electrodes to determine the cyclability and rate capability of lithium insertion into V2O5 center dot 0.55H(2)O nanosheets. The electrodes with the thinnest active material coating (similar to 4 mu m) delivered gravimetric capacities of up to 480 and 280 mA h g(-1) when cycled at current densities of 10 and 200 mA g(-1), respectively.

A surface treatment method has been developed to activate the surface of an AB(5) type (La-20 Ce-7 Pr-1 Nd-4 Al-2 Mn-5 Co-6 Ni-55) alloy. In the process the surface is covered with a porous surface layer containing needle shaped rare earth hydroxides after etching by a potassium hydroxide solution. TEM studies show in addition the presence of a denser surface oxide layer with embedded Ni containing clusters covering the bulk alloy. The magnetic properties of the alloy powders change with the surface treatment. In addition to a paramagnetic component of the bulk alloy, surface treated alloy also displays superparamagnetic and ferromagnetic properties. In electrochemical half-cell tests, the alloy shows better high-rate dischargeability with increasing presence of magnetic clusters in the metal hydride particles surface.

Metal–organic layers (MOLs) represent an emerging class of tunable and functionalizable two-dimensional materials. In this work, the scalable solvothermal synthesis of self-supporting MOLs composed of [Hf₆O₄(OH)₄(HCO₂)₆] secondary building units (SBUs) and benzene-1,3,5-tribenzoate (BTB) bridging ligands is reported. The MOL structures were directly imaged by TEM and AFM, and doped with 4′-(4-benzoate)-(2,2′,2′′-terpyridine)-5,5′′-dicarboxylate (TPY) before being coordinated with iron centers to afford highly active and reusable single-site solid catalysts for the hydrosilylation of terminal olefins. MOL-based heterogeneous catalysts are free from the diffusional constraints placed on all known porous solid catalysts, including metal–organic frameworks. This work uncovers an entirely new strategy for designing single-site solid catalysts and opens the door to a new class of two-dimensional coordination materials with molecular functionalities.