The field-induced ordering of concentrated ferrofluids based on spherical and cuboidal maghemite nanoparticles is studied using small-angle neutron scattering, revealing a qualitative effect of the faceted shape on the interparticle interactions as shown in the structure factor and correlation lengths. Whereas a spatially disordered hard-sphere interaction potential with a short correlation length is found for ∼9 nm spherical nanoparticles, nanocubes of a comparable particle size exhibit a more pronounced interparticle interaction and the formation of linear arrangements. Analysis of the anisotropic two-dimensional pair distance correlation function gives insight into the real-space arrangement of the nanoparticles. On the basis of the short interparticle distances found here, oriented attachment, i.e. a face-to-face arrangement of the nanocubes, is likely. The unusual field dependence of the interparticle correlations suggests a field-induced structural rearrangement.

Cellulose nanofibrils (CNFs) with carboxylated surface ligands are a class of materials with tunable surface functionality, good mechanical properties, and bio-/environmental friendliness. They have been used in many applications as scaffold, reinforcing, or functional materials, where the interaction between adsorbed moisture and the CNF could lead to different properties and structures and become critical to the performance of the materials. In this work, we exploited multiple experimental methods to study the water movement in hydrated films made of carboxylated CNFs prepared by TEMPO oxidation with two different surface charges of 600 and 1550 μmol·g^–1. A combination of quartz crystal microbalance with dissipation (QCM-D) and small-angle X-ray scattering (SAXS) shows that both the surface charge of a single fibril and the films’ network structure contribute to the moisture uptake. The films with 1550 μmol·g^–1 surface charges take up twice the amount of moisture per unit mass, leading to the formation of nanostructures with an average radius of gyration of 2.1 nm. Via the nondestructive quasi-elastic neutron scattering (QENS), a faster motion is explained as a localized movement of water molecules inside confined spheres, and a slow diffusive motion is found with the diffusion coefficient close to bulk water at room temperature via a random jump diffusion model and regardless of the surface charge in films made from CNFs. 

Nanocellulose is known to act as a platform for the in-situ formation of metal oxide nanoparticles, where the multiple components of the resultant hybrids act synergistically toward specific applications. However, typical mineralization reactions require hydrothermal conditions or addition of further reducing agents. Herein, we demonstrate that carboxylated cellulose nanofibril-based films can spontaneously grow functional metal oxide nanoparticles during the adsorption of heavy metal ions from water, without the need of any further chemicals or temperature. Despite the apparent universality of this behavior with different metal ions, this work focuses on studying the in-situ formation of copper oxide nanoparticles on TOCNF films as well as the resultant hybrid films with improved functionality toward dye removal from water and antimicrobial activity. Using a combination of cutting-edge techniques (e.g., in-situ SAXS and QCMD) to systematically follow the nanoparticle formation on the nanocellulosic films in real time, we suggest a plausible mechanism of assembly. Our results confirm that carboxylated cellulose nanofibril films act as universal substrate for the formation of metal oxide nanoparticles, and thus hybrid nanomaterials, during metal ion adsorption processes. This phenomenon enables the upcycling of nanocellulosic materials through multistage applications, thus increasing its sustainability and efficiency in terms of an optimal use of resources.

In this paper, we use dynamic light scattering in polarized and depolarized modes to determine the translational and rotational diffusion coefficients of concentrated rodlike cellulose nanocrystals in aqueous suspension. Within the range of studied concentrations (1-5 wt %), the suspension starts a phase transition from an isotropic to an anisotropic state as shown by polarized light microscopy and viscosity measurements. Small-angle neutron scattering measurements also confirmed the start of cellulose nanocrystal alignment and a decreasing distance between the cellulose nanocrystals with increasing concentration. As expected, rotational and translational diffusion coefficients generally decreased with increasing concentration. However, the translational parallel diffusion coefficient was found to show a local maximum at the onset of the isotropic-to-nematic phase transition. This is attributed to the increased available space for rods to move along their longitudinal axis upon alignment. This increased parallel diffusion coefficient thus confirms the general idea that rodlike particles gain translational entropy upon alignment while paying the price for losing rotational degrees of freedom. Once the concentration increases further, diffusion becomes more hindered even in the aligned regions due to a reduction in the rod separation distance. This leads once again to a decrease in translational diffusion coefficients. Furthermore, the relaxation rate for fast mode translational diffusion (parallel to the long particle axis) exhibited two regimes of relaxation behavior at concentrations where significant alignment of the rods is measured. We attribute this unusual dispersive behavior to two length scales: one linked to the particle length (at large wavevector q) and the other to a twist fluctuation correlation length (at low wavevector q) along the cellulose nanocrystal rods that is of a larger length when compared to the actual length of rods and could be linked to the size of aligned domains.

The ability to probe the assembly, gelation, and helicoidal consolidation of cellulose nanocrystal (CNC) dispersions at high concentrations can provide unique insight into the assembly and can assist optimized manufacturing of CNC-based photonic and structural materials. In this Feature Article, we review and discuss the concentration dependence of the structural features, characterized by the particle separation distance and the helical pitch, at CNC concentrations (c) that range from the isotropic state, over the biphasic range, to the fully liquid crystalline state. The structure evolution of CNC dispersions probed by time resolved small-angle X-ray scattering during evaporation-induced assembly highlighted the importance of gelation and consolidation at high concentrations. We briefly discuss how the homogeneity of helicoidal nanostructures in dry CNC films can be improved and present an outlook for future work.

Maghemite nanoparticles with high surface area were obtained from the dehydroxylation of lepidocrocite prismatic nanoparticles. The synthesis pathway from the precursor to the porous maghemite nanoparticles is inexpensive, simple and gives high surface area values for both lepidocrocite and maghemite. The obtained maghemite nanoparticles contained intraparticle and interparticle pores with a surface area ca. 30 x 10(3) m(2)/mol, with pore volumes in the order of 70 cm(3)/mol. Both the surface area and pore volume depended on the heating rate and annealing temperature, with the highest value near the transformation temperature (180-250 degrees C). Following the transformation, in situ X-ray diffraction (XRD) allowed us to observe the temporal decoupling of the decomposition of lepidocrocite and the growth of maghemite. The combination of high-angle annular dark-field imaging using scanning transmission electron microscopy (HAADF-STEM) and surface adsorption isotherms is a powerful approach for the characterization of nanomaterials with high surface area and porosity.

Inspired by the Bogolanfini dyeing technique, we report how flexible nanofibrillated cellulose (CNF) films can be functionalized and patterned by surface-bound nanoparticles of hydrolyzable tannins and multivalent metal ions with tunable colors. Molecular dynamics simulations show that gallic acid (GA) and ellagic acid (EA) rapidly adsorb and assemble on the CNF surface, and atomic force microscopy confirms that nanosized GA assemblies cover the surface of the CNF. CNF films were patterned with tannin-metal ion nanoparticles by an in-fibre reaction between the pre-impregnated tannin and the metal ions in the printing ink. Spectroscopic studies show that the Fe-III/II ions interact with GA and form surface-bound, stable GA-Fe-III/II nanoparticles. The functionalization and patterning of CNF films with metal ion-hydrolyzable tannin nanoparticles is a versatile route to functionalize films based on renewable materials and of interest for biomedical and environmental applications.

The performance of thin carboxylated cellulose nanofiber-based (CNF) membranes as proton exchange membranes in fuel cells has been measured in situ as a function of CNF surface charge density (600 and 1550 mu mol g(-1)), counterion (H+ or Na+), membrane thickness and fuel cell relative humidity (RH 55 to 95%). The structural evolution of the membranes as a function of RH, as measured by Small Angle X-ray Scattering, shows that water channels are formed only above 75% RH. The amount of absorbed water was shown to depend on the membrane surface charge and counter ions (H+ or Na+). The high affinity of CNF for water and the high aspect ratio of the nanofibers, together with a well-defined and homogenous membrane structure, ensures a proton conductivity exceeding 1 mS cm(-1) at 30 degrees C between 65 and 95% RH. This is two orders of magnitude larger than previously reported values for cellulose materials and only one order of magnitude lower than Nafion 212. Moreover, the CNF membranes are characterized by a lower hydrogen crossover than Nafion, despite being approximate to 30% thinner. Thanks to their environmental compatibility and promising fuel cell performance the CNF membranes should be considered for new generation proton exchange membrane fuel cells.

Carboxylated cellulose nanofibers, prepared by TEMPO-mediated oxidation (TOCN), were processed into asymmetric mesoporous membranes using a facile paper-making approach and investigated as lithium ion battery separators. Membranes made of TOCN with sodium carboxylate groups (TOCN-COO-Na+) showed capacity fading after a few cycles of charging and discharging. On the other hand, its protonated counterpart (TOCN-COOH) showed highly improved electrochemical and cycling stability, displaying 94.5% of discharge capacity maintained after 100 cycles at 1 C rate of charging and discharging. The asymmetric surface porosity of the membranes must be considered when assembling a battery cell as it influences the rate capabilities of the battery. The wood-based TOCN-membranes have a good potential as an ecofriendly alternative to conventional fossil fuel-derived separators without adverse side effects.

TEMPO-oxidized cellulose nanofibrils (TOCN) are pH-responsive biopolymers which undergo sol-gel transition at acidic conditions (pH < 4) due to charge neutralization. Electronically conducting materials can be coated by such gels during aqueous electrolysis, when an electrochemical reaction generates a local pH decrease at the electrode surface. In this work, electro-precipitation of different TOCN gels has been performed on oxygen evolving anodes. We demonstrate that TOCN hydrogels can be electrochemically coated on the surface of any conductive material with even complex 3D shape. Further, not only TOCN but also micro- or nanosized particles containing TOCN composites can be coated on the electrode surface, and coatings containing multiple layers of different composites can be also produced. We demonstrate that this simple and facile electrocoating technique can be subject to various applications, such as coatings making electrodes selective for the hydrogen evolution reaction, as well as a new eco-friendly aqueous-based synthesis of Li-ion battery electrodes.