Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Sialon Ceramics Prepared by Using CaH2 as a Sintering Additive
Stockholms universitet, Naturvetenskapliga fakulteten, Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi.
Stockholms universitet, Naturvetenskapliga fakulteten, Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi.
Stockholms universitet, Naturvetenskapliga fakulteten, Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi.
Stockholms universitet, Naturvetenskapliga fakulteten, Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi.
2008 (Engelska)Ingår i: Journal of the American Ceramic Society, ISSN 0002-7820, Vol. 91, nr 9, s. 2997-3004Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

In developing elongated a-sialon grains, a nitrogen-rich liquidphase sintering method was introduced by using CaH2 as asintering aid, so as to vary the N/O ratio of the liquid phaseformed in the sintering process while keeping the Si/Al ratiosconstant. With increasing addition the phase contents changedfrom single b-sialon to dual b/a-sialons and to single Ca-a-sialon.At low N/O ratios the microstructures contained mainlyequiaxed b-sialon grains, and at high N/O ratios well facetedelongated Ca-a-sialon grains. The improved toughness(KIC57.8 MPa .m1/2) and hardness (HV10517.5 GPa) propertiescan be attributed to the formation of interlocked microstructures.High-temperature compressive deformation testsindicated that the deformation onset temperature is determinedmainly by the Si/Al and N/O ratios, whereas the deformationrate is affected by the microstructure, i.e., the morphology andamounts of elongated a-sialon grains and residual glass phase,especially for the sialons with low N/O ratios.

Ort, förlag, år, upplaga, sidor
2008. Vol. 91, nr 9, s. 2997-3004
Nationell ämneskategori
Kemi
Identifikatorer
URN: urn:nbn:se:su:diva-25767DOI: 10.1111/j.1551-2916.2008.02549.xISI: 000259151000035OAI: oai:DiVA.org:su-25767DiVA, id: diva2:200491
Anmärkning
Part of urn:nbn:se:su:diva-8568Tillgänglig från: 2009-02-26 Skapad: 2009-02-17 Senast uppdaterad: 2012-03-23Bibliografiskt granskad
Ingår i avhandling
1. Synthesis and Characterization of Nitrogen-rich Calcium α-Sialon Ceramics
Öppna denna publikation i ny flik eller fönster >>Synthesis and Characterization of Nitrogen-rich Calcium α-Sialon Ceramics
2009 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

In this thesis, a synthesis concept has been developed, which uses nitrogen-rich liquid phases for sintering of Ca-α-sialon ceramics. First, keeping the Si/Al ratios constant, the effects of N/O ratio on the properties and microstructure were investigated through a liquid phase sintering process. Second, nitrogen-rich Ca-α-sialon ceramics, with nominal compositions: CaxSi12-2xAl2xN16, x < 2.0, was synthesized and characterized. Third, mechanical and thermal properties of nitrogen-rich Ca-α-sialons were investigated in terms of high temperature deformation resistance,reaction mechanism, phase stability and oxidation resistance, and further correlated to their phase assemblage and microstructure observation.

It has been found that increasing the N/O and Ca/Al ratio simultaneously in the materials could result in development of a microstructure with well shaped, high-aspect-ratio Ca-α-sialon grains, and an improvement in both toughness and hardness.

For the nitrogen-rich Ca-α-sialon, mono-phasic α-sialon ceramics were obtained for 0.51 ≤ x ≤ 1.32. The obtained Ca-α-sialon ceramics with elongated-grain microstructures show a combination of high hardness and high fracture toughness. Compared with the oxygen-rich Ca-α-sialons, the nitrogen-rich Ca-α-sialons exhibited approximately 150 oC higher deformation onset temperatures and decent properties even after the deformation.

The α-sialon phase was first observed at 1400 oC, however the phase pure Ca-α-sialon ceramics couldn’t be obtained until 1800 oC. The nitrogen-rich Ca-α-sialons were thermal stable, no phase transformation observed in the temperatures range1400-1600 oC. In general, mixed α/β-sialon showed better oxidation resistance than pure α-sialon in the low temperature range (1250-1325 oC), while α-sialons with compositions located at α/β-sialon border-line showed significant weight gains over the entire temperature range (1250-1400 oC).

Ort, förlag, år, upplaga, sidor
Stockholm: Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi, 2009. s. 57
Nyckelord
Nitrogen-rich, SiAlON, Sintering, Microstructure, Properties
Nationell ämneskategori
Oorganisk kemi
Forskningsämne
oorganisk kemi
Identifikatorer
urn:nbn:se:su:diva-8568 (URN)978-91-7155-823-7 (ISBN)
Disputation
2009-03-20, Magnélisalen, Kemiska övningslaboratoriet, Svante Arrhenius väg 12 A, Stockholm, 13:00
Opponent
Handledare
Tillgänglig från: 2009-02-26 Skapad: 2009-02-17Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Sök vidare i DiVA

Av författaren/redaktören
Shen, ZhijianGrins, JekabsSaeid, Esmaeilzadeh
Av organisationen
Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi
Kemi

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 87 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf