In this work, silver-bismuth-halide thin films, exhibiting low toxicity and good stability, were explored systemically by gradually substituting iodide, I, with bromide, Br, in the AgBi2I7 system. It was found that the optical bandgap can be tuned by varying the I/Br ratio. Moreover, the film quality was improved when introducing a small amount of Br. The solar cell was demonstrated to be more stable at ambient conditions and most efficient when incorporating 10% Br, as a result of decreased recombination originating from the increased grain size. Thus, replacing a small amount of I with Br was beneficial for photovoltaic performance.

Silver bismuth iodide (Ag–Bi–I) light absorbers are interesting candidates as lead-free and low-toxic metal-halide materials for solar cell applications. In this work, the partial exchange of bismuth, Bi, with antimony, Sb, is investigated in samples prepared from a solution targeting stoichiometry AgBi₂I₇. Samples with a gradually increased exchange of Bi by Sb are prepared and light absorption measurements show that the absorption edge is gradually blue-shifted with increasing the amount of Sb. This trend in the shift in combination with the X-ray diffraction and X-ray photoelectron spectroscopy measurements, suggest that new materials with a mixture of Sb and Bi are formed. The density functional theory based electronic structure calculations reproduce the trend observed in the experiments when including spin–orbit coupling, which indicates the importance of relativistic effects in these materials. X-ray photoelectron spectroscopy is used to characterize the materials, and confirms the exchange of Bi to Sb in the samples. When Sb is included in the material, the grain size changes between 50 and 200 nm and the solar cell performance also changes. An optimal power conversion efficiency with excellent reproducibility and stability is obtained for a solar cell with the ratio of Sb/Bi equal to 3.

Lead-free double perovskites, A₂M⁺M^′3+X₆, are considered as promising alternatives to lead-halide perovskites, in optoelectronics applications. Although iodide (I) and bromide (Br) mixing is a versatile tool for bandgap tuning in lead perovskites, similar mixed I/Br double perovskite films have not been reported in double perovskites, which may be due to the large activation energy for ion migration. In this work, mixed Br/I double perovskites were realized utilizing an anion exchange method starting from Cs₂AgBiBr₆ solid thin-films with large grain-size. The optical and structural properties were studied experimentally and theoretically. Importantly, the halide exchange mechanism was investigated. Hydroiodic acid was the key factor to facilitate the halide exchange reaction, through a dissolution–recrystallization process. In addition, the common organic iodide salts could successfully perform halide-exchange while retaining high mixed-halide phase stability and strong light absorption capability.

The organic component (methylammonium) of CH3NH3PbI3-xClx-based perovskites shows electronic hybridization with the inorganic framework via H-bonding between N and I sites. Femtosecond dynamics induced by core excitation are shown to strongly influence the measured X-ray emission spectra and the resonant inelastic soft X-ray scattering of the organic components. The N K core excitation leads to a greatly increased N-H bond length that modifies and strengthens the interaction with the inorganic framework compared to that in the ground state. The study indicates that excited-state dynamics must be accounted for in spectroscopic studies of this perovskite solar cell material, and the organic-inorganic hybridization interaction suggests new avenues for probing the electronic structure of this class of materials. It is incidentally shown that beam damage to the methylamine component can be avoided by moving the sample under the soft X-ray beam to minimize exposure and that this procedure is necessary to prevent the creation of experimental artifacts.

A detailed understanding of the surface and interface properties of lead halide perovskites is of interest for several applications, in which these materials may be used. To develop this understanding, the study of clean crystalline surfaces can be an important stepping stone. In this work, the surface properties and electronic structure of two different perovskite single crystal compositions (MAPbI₃ and Cs_xFA_1–xPbI₃) are investigated using synchrotron-based soft X-ray photoelectron spectroscopy (PES), molecular dynamics simulations, and density functional theory. The use of synchrotron-based soft X-ray PES enables high surface sensitivity and nondestructive depth-profiling. Core level and valence band spectra of the single crystals are presented. The authors find two carbon 1s contributions at the surface of MAPbI₃ and assign these to MA⁺ ions in an MAI-terminated surface and to MA⁺ ions below the surface. It is estimated that the surface is predominantly MAI-terminated but up to 30% of the surface can be PbI₂-terminated. The results presented here can serve as reference spectra for photoelectron spectroscopy investigations of technologically relevant polycrystalline thin films, and the findings can be utilized to further optimize the design of device interfaces.