In this work, we introduce a modified dip-and-pull electrochemical X-ray photoelectron spectroscopy (ECXPS) approach that offers new mechanistic insight into the alkaline carbon monoxide reduction reaction (CORR) over a Cu(111) single crystal surface. We tackle two major unresolved questions in the CORR mechanism that persist in the literature. Firstly, we address the mechanism for methane formation on Cu(111) and show that the mechanism likely proceeds via atomic carbon, which subsequently couples, leading to the accumulation of amorphous carbon on the surface. Secondly, we provide insight into whether the mechanism for acetate formation occurs entirely on the surface or partially within the solution phase, showing that acetate is present on the surface, indicating a surface-based reaction. These insights into surface-based mechanisms provide a handle for designing future catalysts that can efficiently target the binding of specific intermediates. Furthermore, we expect that our modified approach to dip-and-pull ECXPS – in which we have changed the electrode geometry, the method of introducing the reactant gas and used hard x-rays – will significantly expand the technique's applicability, enabling studies of the CO(2)RR and beyond.

While Au electro-oxidation in acidic aqueous media on a phenomenological level proceeds directly from Au(0) to Au(III), it has previously been suggested that Au(I) states are intermediate species of the oxidation mechanism. Here, additional evidence for the transient Au(I) is provided by the probing the electro-oxidation of Au electrode operando in a pH = 3 perchloric acid (HClO4) electrolyte by high-energy-resolution fluorescence-detected X-ray absorption near-edge structure (HERFD–XANES) at potentials up to 1.8 V versus the reversible hydrogen electrode (RHE). The perchlorate ions (ClO4−) in the electrolyte are used as sacrificial oxidizing agents. The reduced perchlorate compounds in turn produce chloride ions, which react with Au ions to form Au–Cl compounds. The operando HERFD–XANES detects and identifies the chlorinated compounds as surficial Au(I), present during the early stages of Au oxidation. It is further inferred that Au(I) is accessed by the electrolyte. These observations are consistent with the previously hypothesized route for Au electro-oxidation involving charge transfer after a dipole-induced place-exchange step.

There are several difficulties when experimentally determined reaction mechanisms are applied from model systems to real catalysis. Besides the infamous pressure and material gaps, it is sometimes necessary to consider impurities in the real reactant feedstock that can act as promoters or catalyst poisons and alter the reaction path. In this study, the effect of sulfur on the dehydrogenation of naphthalene on Ni(111) is investigated by using X-ray photoelectron spectroscopy and scanning tunneling microscopy. Sulfur induces a (5√3 × 2) surface reconstruction, as previously reported in the literature. The sulfur does not have a strong effect on the dehydrogenation temperature of naphthalene. However, the presence of sulfur leads to a preferred formation of carbidic over graphitic carbon and a strong inhibition of carbon diffusion into the nickel bulk, which is one of the steps of destructive whisker carbon formation described in the catalysis literature.

Oxide-derived metals are produced by reducing an oxide precursor. These materials, including gold, have shown improved catalytic performance over many native metals. The origin of this improvement for gold is not yet understood. In this study, operando non-resonant sum frequency generation (SFG) and ex situ high-pressure X-ray photoelectron spectroscopy (HP-XPS) have been employed to investigate electrochemically-formed oxide-derived gold (OD-Au) from polycrystalline gold surfaces. A range of different oxidizing conditions were used to form OD-Au in acidic aqueous medium (H₃PO₄, pH = 1). Our electrochemical data after OD-Au is generated suggest that the surface is metallic gold, however SFG signal variations indicate the presence of subsurface gold oxide remnants between the metallic gold surface layer and bulk gold. The HP-XPS results suggest that this subsurface gold oxide could be in the form of Au₂O₃ or Au(OH)₃. Furthermore, the SFG measurements show that with reducing electrochemical treatments the original gold metallic state can be restored, meaning the subsurface gold oxide is released. This work demonstrates that remnants of gold oxide persist beneath the topmost gold layer when the OD-Au is created, potentially facilitating the understanding of the improved catalytic properties of OD-Au.

Catalyst passivation through carbon poisoning is a common and costly problem as it reduces the lifetime and performance of the catalyst. Adding oxygen to the feed stream could reduce poisoning but may also affect the activity negatively. We have studied the dehydrogenation, decomposition, and desorption of naphthalene co-adsorbed with oxygen on Ni(111) by combining temperature-programmed desorption (TPD), sum frequency generation spectroscopy (SFG), photoelectron spectroscopy (PES), and density functional theory (DFT). Chemisorbed oxygen reduces the sticking of naphthalene and shifts H2 production and desorption to higher temperatures by blocking active Ni sites. Oxygen increases the production of CO and reduces carbon residues on the surface. Chemisorbed oxygen is readily removed when naphthalene is decomposed. Oxide passivates the surface and reduces the sticking coefficient. But it also increases the production of CO dramatically and reduces the carbon residues. Ni2O3 is more active than NiO.

Controlled electrochemical oxidation of hydrocarbons to desired products is an attractive approach in catalysis. Here we study the electrochemical propene oxidation under operando conditions using Pd L-edge X-ray absorption spectroscopy (XAS) as a sensitive probe to elucidate surface processes occurring during catalysis. Together with ab initio multiple-scattering calculations, our XAS results enable assignment of characteristic changes of the Pd L-edge intensity and energy position in terms of a mechanistic understanding of the selective oxidation of propene. The results, supported by electrochemical density functional theory DFT simulations, show that in the potential range of 0.8–1.0 V vs. the reversible hydrogen electrode (RHE), selective oxidation of propene to acrolein and acrylic acid occurs on the metallic Pd surface. These reactions are proposed to proceed via the Langmuir–Hinshelwood mechanism. In contrast, for the potential range of 1.1–1.3 V vs. RHE, selective oxidation of propene to propylene glycol takes place on a Pd oxide surface.

The influence of ring-puckering on the light-induced ring-opening dynamics of heterocyclic compounds was studied on the sample 5-membered ring molecules gamma-valerolactone and 5H-furan-2-one using time-resolved photoelectron spectroscopy and ab initio molecular dynamics simulations. In gamma-valerolactone, ring-puckering is not a viable relaxation channel and the only available reaction pathway is ring-opening, which occurs within one vibrational period along the C-O bond. In 5H-furan-2-one, the C = C double bond in the ring allows for ring-puckering which slows down the ring-opening process by about 150 fs while only marginally reducing its quantum yield. This demonstrates that ring-puckering is an ultrafast process, which is directly accessible upon excitation and which spreads the excited state wave packet quickly enough to influence even the outcome of an otherwise expectedly direct ring-opening reaction.

The excited state relaxation pathways of isoxazole and oxazole upon excitation with UV-light were investigated by nonadiabatic ab initio dynamics simulations and time-resolved photoelectron spectroscopy. Excitation of the bright ππ*-state of isoxazole predominantly leads to ring-opening dynamics. Both the initially excited ππ*-state and the dissociative πσ*-state offer a combined barrier-free reaction pathway, such that ring-opening, defined as a distance of more than 2 Å between two neighboring atoms, occurs within 45 fs. For oxazole, in contrast, the excited state dynamics is about twice as slow (85 fs) and the quantum yield for ring-opening is lower. This is caused by a small barrier between the ππ*-state and the πσ*-state along the reaction path, which suppresses direct ring-opening. Theoretical findings are consistent with the measured time-resolved photoelectron spectra, confirming the timescales and the quantum yields for the ring-opening channel. The results indicate that a combination of time-resolved photoelectron spectroscopy and excited state dynamics simulations can explain the dominant reaction pathways for this class of molecules. As a general rule, we suggest that the antibonding σ*-orbital located between the oxygen atom and a neighboring atom of a five-membered heterocyclic system provides a driving force for ring-opening reactions, which is modified by the presence and position of additional nitrogen atoms.

The temperature dependent dehydrogenation of naphthalene on Ni(111) has been investigated using vibrational sum-frequency generation spectroscopy, X-ray photoelectron spectroscopy, scanning tunneling microscopy, and density functional theory with the aim of discerning the reaction mechanism and the intermediates on the surface. At 110 K, multiple layers of naphthalene adsorb on Ni(111); the first layer is a flat lying chemisorbed monolayer, whereas the next layer(s) consist of physisorbed naphthalene. The aromaticity of the carbon rings in the first layer is reduced due to bonding to the surface Ni-atoms. Heating at 200 K causes desorption of the multilayers. At 360 K, the chemisorbed naphthalene monolayer starts dehydrogenating and the geometry of the molecules changes as the dehydrogenated carbon atoms coordinate to the nickel surface; thus, the molecule tilts with respect to the surface, recovering some of its original aromaticity. This effect peaks at 400 K and coincides with hydrogen desorption. Increasing the temperature leads to further dehydrogenation and production of H-2 gas, as well as the formation of carbidic and graphitic surface carbon. Published under license by AIP Publishing.

One important relaxation pathway for photo-excited five-membered heterocyclic organic molecules is ring-opening via a dissociative pi sigma* state. In this study, we investigate the influence of this pathway in furan and several hydrogenated and methylated derivatives by combining time-resolved photoelectron spectroscopy with time-dependent density functional theory and coupled cluster calculations. We find strong experimental evidence that the ring-opening channel is the major relaxation channel in furan, 2,3-dihydrofuran, and 2-methylfuran (2-MF). In 2,5-dimethylfuran (25-DMF), however, we observe that the molecules relax either via a pi 3s Rydberg state or through a direct return to the ground state by undergoing ring-puckering motions. From the supporting calculations, for 2-MF and 25-DMF, we predict that there is strong mixing between the pi sigma* state and the pi 3s Rydberg state along the ring opening pathway. However, in 25-DMF, no crossing between the pi sigma*/pi 3s state and the initially excited pi pi* state can be found along the ring opening coordinate, effectively blocking this channel.