Transpiration drives up to 40 % of terrestrial precipitation, with forests playing a critical role. This study combines long-term sap flow measurements and surface-based cloud observations to examine how different clouds affect tree transpiration across boreal and temperate European forests. Under specific cloudy conditions, sap flow can exceed clear-sky levels, reflecting distinct radiation effects of various cloud types. However, overall cloudiness reduces maximum sap flow by up to 40 %. A key finding is the contrasting influence of low- and high-altitude clouds: low-altitude clouds suppress transpiration by limiting incoming radiation, while high-altitude clouds have negligible impact even when overcast. Structural equation modelling further indicates a pathway linking transpiration to cloudiness when other meteorological and site factors are accounted for. Satellite data show a decline in low‑altitude cloud fraction over boreal forests, and a highly simplified model-based order‑of‑magnitude estimate suggests a potential associated increase in transpiration equivalent to ∼0.6–1.2 mm of precipitation annually. These results emphasize how climate change driven changes in cloud cover and type may alter the moisture flux to the atmosphere, impacting regional and global water cycles.

The interactions between aerosols and clouds are still one of the largest sources of uncertainty in quantifying anthropogenic radiative forcing. To reduce this uncertainty, we must first determine the baseline natural aerosol loading for different environments. In the pristine and hardly accessible polar regions, the exact nature of local aerosol sources remains poorly understood. It is unclear how oceans, including sea ice, control the aerosol budget, influence cloud formation, and determine the cloud phase. One critical question relates to the abundance and characteristics of biological aerosol particles that are important for the formation and microphysical properties of Arctic mixed-phase clouds. Within this work, we conducted a comprehensive analysis of various potential local sources of natural aerosols in the high Arctic over the pack ice during the ARTofMELT expedition in May–June 2023. Samples of snow, sea ice, seawater, and the sea surface microlayer (SML) were analysed for their microphysical, chemical, and fluorescent properties immediately after collection. Accompanied analyses of ice nucleating properties and biological cell quantification were performed at a later stage. We found that increased biological activity in seawater and the SML during the late Arctic spring led to higher emissions of fluorescent primary biological aerosol particles (fPBAPs) and other highly fluorescent particles (OHFPs, here organic-coated sea salt particles). Surprisingly, the concentrations of ice nucleating particles (INPs) in the corresponding liquid samples did not follow this trend. Gradients in OHFPs, fPBAPs, and black carbon indicated an anthropogenic pollution signal in surface samples especially in snow but also in the top layer of the sea ice core and SML samples. Salinity did not affect the aerosolisation of fPBAPs or sample ice nucleating activity. Compared to seawater, INP and fPBAP concentrations were enriched in sea ice samples. All samples showed distinct differences in their biological, chemical, and physical properties, which can be used in future work for an improved source apportionment of natural Arctic aerosol to reduce uncertainties associated with their representation in models and impacts on Arctic mixed-phase clouds.

Boreal forests emit terpenoid biogenic volatile organic compounds (BVOCs) that significantly affect atmospheric chemistry. Our understanding of the variation of BVOC species emitted from boreal ecosystems is based on relatively few datasets, especially at the ecosystem-level. We conducted measurements to obtain BVOC flux observations above the boreal forest at the ICOS (Integrated Carbon Observation System) station Norunda in central Sweden. The goal was to study concentrations and fluxes of terpenoids, including isoprene, speciated monoterpenes (MTs), and sesquiterpenes (SQTs), during a Scandinavian summer. Measurements (10 Hz sampling) from a Vocus proton-transfer-reaction time-of-flight mass spectrometer (Vocus PTR-ToF-MS) were used to quantify a wide range of BVOC fluxes, including total MT (386 (± 5) ng m⁻² s⁻¹; β=0.1 °C⁻¹), using the eddy-covariance (EC) method. Surface-layer gradient (SLG) flux measurements were performed on selected daytime sampling periods, using thermal-desorption adsorbent tube sampling, to establish speciated MT fluxes. The effect of chemical degradation on measured terpenoid fluxes relative to surface exchange rates (F/E) was also investigated using stochastic Lagrangian transport modeling in forest-canopy. While the effect on isoprene was within EC-flux uncertainty ( F_ISO/E_ISO<  5 %), the effect on SQT and nighttime MT was significant, with average F/E ratios for nighttime F_MT/E_MT= ca. 0.9 (0.87–0.93), nighttime F_SQT/E_SQT = 0.35 (0.31–0.41), and daytime F_SQT/E_SQT = 0.41 (0.37–0.47). The main compounds contributing to MT flux were α-pinene and Δ³-carene. Summer shifts in speciated MT emissions for Δ³-carene were detected, featuring a decrease in its relative fraction among observed MT compounds from June to August sampling periods, indicating that closer attention to seasonality of individual MT species in BVOC emission and climate models is warranted.

Dimethyl sulfide (DMS) is the major sulfur species emitted from the ocean. The gas-phase oxidation of DMS by hydroxyl radicals proceeds through the stable, soluble intermediate hydroperoxymethyl thioformate (HPMTF), eventually forming carbonyl sulfide (OCS) and sulfur dioxide (SO₂). Recent work has shown that HPMTF is efficiently lost to marine boundary layer (MBL) clouds, thus arresting OCS and SO₂ production and their contributions to new-particle formation and growth events. To date, no long-term field studies exist to assess the extent to which frequent cloud processing impacts the fate of HPMTF. Here, we present 6 weeks of measurements of the cloud fraction and the marine sulfur species methanethiol, DMS, and HPMTF made at the Atmospheric Radiation Measurement (ARM) research facility on Graciosa Island, Azores, Portugal. Using an observationally constrained chemical box model, we determine that cloud loss is the dominant sink of HPMTF in this region of the MBL during the study, accounting for 79 %–91 % of HPMTF loss on average. When accounting for HPMTF uptake to clouds, we calculate campaign average reductions in DMS-derived MBL SO₂ and OCS of 52 %–60 % and 80 %–92 % for the study period. Using yearly measurements of the site- and satellite-measured 3D cloud fraction and DMS climatology, we infer that HPMTF cloud loss is the dominant sink of HPMTF in the eastern North Atlantic during all seasons and occurs on timescales faster than what is prescribed in global chemical transport models. Accurately resolving this rapid loss of HPMTF to clouds has important implications for constraining drivers of MBL new-particle formation.

While aerosol–cloud interactions have been extensively investigated, large knowledge gaps still exist. Atmospheric organic nitrogen (ON) species and their formation in the aqueous phase are potentially important due to (1) their influence on aerosol optical and hygroscopic properties and (2) their adverse effects on human health. This study aimed to characterize the wintertime aerosol and fog chemical composition, with a focus on the formation of ON, at a rural site in the Italian Po Valley. Online chemical characterization of interstitial aerosol (nonactivated particles) and fog residuals (dried fog droplets) were performed in parallel. Fog residuals were sampled using a ground-based counterflow virtual impactor (GCVI) inlet and analyzed by a soot particle aerosol mass spectrometer (SP-AMS), while the interstitial aerosol was characterized by a high-resolution time-of-flight AMS (HR-ToF-AMS). Our results revealed an enhancement of nitrate (NO₃^-; 43.3% vs. 34.6%), ammonium (NH₄⁺; 15.2% vs. 11.7%), and sulfate (SO₄^2-; 10.5% vs. 6.6%) in the fog residuals compared to the ambient non-fog aerosol, while organic aerosol (OA; 27.6% vs. 39.4%) and refractory black carbon (rBC; 2.3% vs. 6.3%) were less abundant. An enrichment of ON was observed in the fog, mainly consisting of C_xH_yN₁⁺ ions, partly originating from amines in the fog. C_xH_yN₂⁺ ions, fragments linked to imidazoles, were overproportionally present in the fog, which was verified by proton nuclear magnetic resonance (¹H-NMR) spectroscopy, suggesting aqueous-phase formation. This study demonstrates that fogs and clouds are potentially important sinks for gaseous nitrogen species and media for the aqueous production of nitrogen-containing organic aerosol in the atmosphere.

The Italian Po Valley is one of the most polluted regions in Europe. During winter, meteorological conditions favor long and dense fogs, which strongly affect visibility and human health. In spring, the frequency of nighttime fogs reduces while daytime new particle formation events become more common. This transition is likely caused by a reduction in particulate matter (PM_2.5), leading to a decrease in the relevant condensation sink. The physics and chemistry of fog and aerosol have been studied at the San Pietro Capofiume site since the 1980s, but the detailed processes driving the observed trends are not fully understood. Hence, during winter and spring 2021/22, the Fog and Aerosol Interaction Research Italy (FAIRARI) campaign was carried out, using a wide spectrum of approaches, including in situ measurements, outdoor chamber experiments, and remote sensing. Atmospheric constituents and their properties were measured ranging from gas molecules and molecular clusters to fog droplets. One unique aspect of this study is the direct measurement of the aerosol composition inside and outside of fog, showing a slightly greater dominance of organic compounds in the interstitial compared to the droplet phase. Satellite observations of fog provided a spatial context and agreed well with in situ measurements of droplet size. They were complemented with in situ chamber experiments, providing insights into oxidative processes and revealing a large secondary organic aerosol-forming potential of ambient air upon chemical aging. The oxidative potential of aerosol and fog water inferred the impact of aerosol–fog interactions on particle toxicity.

In this study, we investigate atmospheric new particle formation (NPF) across 65 d in the Bolivian central Andes at two locations: the mountaintop Chacaltaya station (CHC, 5.2 km above sea level) and an urban site in El Alto–La Paz (EAC), 19 km apart and at 1.1 km lower altitude. We classified the days into four categories based on the intensity of NPF, determined by the daily maximum concentration of 4–7 nm particles: (1) high at both sites, (2) medium at both, (3) high at EAC but low at CHC, and (4) low at both. These categories were then named after their emergent and most prominent characteristics: (1) Intense-NPF, (2) Polluted, (3) Volcanic, and (4) Cloudy. This classification was premised on the assumption that similar NPF intensities imply similar atmospheric processes. Our findings show significant differences across the categories in terms of particle size and volume, sulfuric acid concentration, aerosol compositions, pollution levels, meteorological conditions, and air mass origins. Specifically, intense NPF events (1) increased Aitken mode particle concentrations (14–100 nm) significantly on 28 % of the days when air masses passed over the Altiplano. At CHC, larger Aitken mode particle concentrations (40–100 nm) increased from 1.1 × 103 cm−3 (background) to 6.2 × 103 cm−3, and this is very likely linked to the ongoing NPF process. High pollution levels from urban emissions on 24 % of the days (2) were found to interrupt particle growth at CHC and diminish nucleation at EAC. Meanwhile, on 14 % of the days, high concentrations of sulfate and large particle volumes (3) were observed, correlating with significant influences from air masses originating from the actively degassing Sabancaya volcano and a depletion of positive 2–4 nm ions at CHC but not at EAC. During these days, reduced NPF intensity was observed at CHC but not at EAC. Lastly, on 34 % of the days, overcast conditions (4) were associated with low formation rates and air masses originating from the lowlands east of the stations. In all cases, event initiation (∼ 09:00 LT) generally occurred about half an hour earlier at CHC than at EAC and was likely modulated by the daily solar cycle. CHC at dawn is in an air mass representative of the regional residual layer with minimal local surface influence due to the barren landscape. As the day progresses, upslope winds bring in air masses affected by surface emissions from lower altitudes, which may include anthropogenic or biogenic sources. This influence likely develops gradually, eventually creating the right conditions for an NPF event to start. At EAC, the start of NPF was linked to the rapid growth of the boundary layer, which favored the entrainment of air masses from above. The study highlights the role of NPF in modifying atmospheric particles and underscores the varying impacts of urban versus mountain top environments on particle formation processes in the Andean region.

Early growth of atmospheric particles is essential for their survival and ability to participate in cloud formation. Many different atmospheric vapors contribute to the growth, but even the main contributors still remain poorly identified in many environments, such as high-altitude sites. Based on measured organic vapor and sulfuric acid concentrations under ambient conditions, particle growth during new particle formation events was simulated and compared with the measured particle size distribution at the Chacaltaya Global Atmosphere Watch station in Bolivia (5240 m a.s.l.) during April and May 2018, as a part of the SALTENA (Southern Hemisphere high-ALTitude Experiment on particle Nucleation and growth) campaign. Despite the challenging topography and ambient conditions around the station, the simple particle growth model used in the study was able to show that the detected vapors were sufficient to explain the observed particle growth, although some discrepancies were found between modeled and measured particle growth rates. This study, one of the first of such studies conducted on high altitude, gives insight on the key factors affecting the particle growth on the site and helps to improve the understanding of important factors on high-altitude sites and the atmosphere in general. Low-volatility organic compounds originating from multiple surrounding sources such as the Amazonia and La Paz metropolitan area were found to be the main contributor to the particle growth, covering on average 65 % of the simulated particle mass in particles with a diameter of 30 nm. In addition, sulfuric acid made a major contribution to the particle growth, covering at maximum 37 % of the simulated particle mass in 30 nm particles during periods when volcanic activity was detected on the area, compared to around 1 % contribution on days without volcanic activity. This suggests that volcanic emissions can greatly enhance the particle growth.

Black carbon (BC) is a major component of submicron particulate matter (PM), with significant health and climate impacts. Many cities in emerging countries lack comprehensive knowledge about BC emissions and exposure levels. This study investigates BC concentration levels, identifies its emission sources, and characterizes the optical properties of BC at urban background sites of the two largest high-altitude Bolivian cities: La Paz (LP) (3600 m above sea level) and El Alto (EA) (4050 m a.s.l.), where atmospheric oxygen levels and intense radiation may affect BC production. The study relies on concurrent measurements of equivalent black carbon (eBC), elemental carbon (EC), and refractory black carbon (rBC) and their comparison with analogous data collected at the nearby Chacaltaya Global Atmosphere Watch Station (5240 m a.s.l). The performance of two independent source apportionment techniques was compared: a bilinear model and a least-squares multilinear regression (MLR). Maximum eBC concentrations were observed during the local dry season (LP: eBC = 1.5 ± 1.6 µg m−3; EA: 1.9 ± 2.0 µg m−3). While eBC concentrations are lower at the mountain station, daily transport from urban areas is evident. Average mass absorption cross sections of 6.6–8.2 m2 g−1 were found in the urban area at 637 nm. Both source apportionment methods exhibited a reasonable level of agreement in the contribution of biomass burning (BB) to absorption. The MLR method allowed the estimation of the contribution and the source-specific optical properties for multiple sources, including open waste burning.

Accounting for the condensation of organic vapors along with water vapor (co-condensation) has been shown in adiabatic cloud parcel model (CPM) simulations to enhance the number of aerosol particles that activate to form cloud droplets. The boreal forest is an important source of biogenic organic vapors, but the role of these vapors in co-condensation has not been systematically investigated. In this work, the environmental conditions under which strong co-condensation-driven cloud droplet number enhancements would be expected over the boreal biome are identified. Recent measurement technology, specifically the Filter Inlet for Gases and AEROsols (FIGAERO) coupled to an iodide-adduct chemical ionization mass spectrometer (I-CIMS), is utilized to construct volatility distributions of the boreal atmospheric organics. Then, a suite of CPM simulations initialized with a comprehensive set of concurrent aerosol observations collected in the boreal forest of Finland during spring 2014 is performed. The degree to which co-condensation impacts droplet formation in the model is shown to be dependent on the initialization of temperature, relative humidity, updraft velocity, aerosol size distribution, organic vapor concentration, and the volatility distribution. The predicted median enhancements in cloud droplet number concentration (CDNC) due to accounting for the co-condensation of water and organics fall on average between 16 % and 22 %. This corresponds to activating particles 10–16 nm smaller in dry diameter that would otherwise remain as interstitial aerosol. The highest CDNC enhancements (ΔCDNC) are predicted in the presence of a nascent ultrafine aerosol mode with a geometric mean diameter of ∼ 40 nm and no clear Hoppel minimum, indicative of pristine environments with a source of ultrafine particles (e.g., via new particle formation processes). Such aerosol size distributions are observed 30 %–40 % of the time in the studied boreal forest environment in spring and fall when new particle formation frequency is the highest. To evaluate the frequencies with which such distributions are experienced by an Earth system model over the whole boreal biome, 5 years of UK Earth System Model (UKESM1) simulations are further used. The frequencies are substantially lower than those observed at the boreal forest measurement site (< 6 % of the time), and the positive values, peaking in spring, are modeled only over Fennoscandia and the western parts of Siberia. Overall, the similarities in the size distributions between observed and modeled (UKESM1) are limited, which would limit the ability of this model, or any model with a similar aerosol representation, to project the climate relevance of co-condensation over the boreal forest. For the critical aerosol size distribution regime, ΔCDNC is shown to be sensitive to the concentrations of semi-volatile and some intermediate-volatility organic compounds (SVOCs and IVOCs), especially when the overall particle surface area is low. The magnitudes of ΔCDNC remain less affected by the more volatile vapors such as formic acid and extremely low- and low-volatility organic compounds (ELVOCs and LVOCs). The reasons for this are that most volatile organic vapors condense inefficiently due to their high volatility below the cloud base, and the concentrations of LVOCs and ELVOCs are too low to gain significant concentrations of soluble mass to reduce the critical supersaturations enough for droplet activation to occur. A reduction in the critical supersaturation caused by organic condensation emerges as the main driver of the modeled ΔCDNC. The results highlight the potential significance of co-condensation in pristine boreal environments close to sources of fresh ultrafine particles. For accurate predictions of co-condensation effects on CDNC, also in larger-scale models, an accurate representation of the aerosol size distribution is critical. Further studies targeted at finding observational evidence and constraints for co-condensation in the field are encouraged.