N-14 magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectra of diamagnetic LaTiO2N perovskite oxynitride and its paramagnetic counterpart CeTiO2N are presented. The latter, to the best of our knowledge, constitutes the first high-resolution N-14 MAS NMR spectrum collected from a paramagnetic solid material. The unpaired 4f-electrons in CeTiO2N do not induce a paramagnetic N-14 NMR shift. This is remarkable given the direct Ce-N contacts in the structure for which ab initio calculations predict substantial Ce -> N-14 contact shift interaction. The same effect is revealed with N-14 MAS NMR for SrWO2N (unpaired 5d-electrons).

Efficient treatment of domestic and industrial wastewater is one of the major challenges of the 21st century. Among the inorganic pollutants, nitrogen species are significant contaminants and the management of the nitrogen cycle is one the most crucial parts of wastewater purification. Herein, we report an integrated method that minimizes the amount of chemicals used, can be empowered by renewable energy, uses renewables materials for ammonia recovery, and is scalable. Complete denitrification of wastewater was achieved by combining electrochemical and adsorption treatment for real wastewater samples from the Stockholm water pilot plant. About 98% of nitrate was selectively converted to ammonia over abundant copper electrocatalysts in the presence of Na2SO4-supporting electrolyte at -0.6 V vs reversible hydrogen electrode (RHE) within 3 h. The valorized nitrate in the form of ammonia could be recovered by means of cheap kraft lignin-SiO2 sorbents to achieve total denitrification. The presented method is economically feasible, scalable, and contributes to sustainable recycling within a circular economy.

Metal-free nitrogen-doped carbon is considered as a green functional material, but the structural determination of the atomic positions of nitrogen remains challenging. We recently demonstrated that directly-excited solid state N-15 NMR (ssNMR) spectroscopy is a powerful tool for the determination of such positions in N-doped carbon at natural N-15 isotope abundance. Here we report a green chemistry approach for the synthesis of N-doped carbon using cellulose as a precursor, and a study of the catalytic properties and atomic structures of the related catalyst. N-doped carbon (NH3) was obtained by the oxidation of cellulose with HNO3 followed by ammonolysis at 800 degrees C. It had a N content of 6.5 wt% and a surface area of 557 m(2) g(-1), and N-15 ssNMR spectroscopy provided evidence for graphitic nitrogen besides regular pyrrolic and pyridinic nitrogen. This structural determination allowed probing the role of graphitic nitrogen in electrocatalytic reactions, such as the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and nitrite reduction reaction. The N-doped carbon catalyst (NH3) showed higher electrocatalytic activities in the OER and HER under alkaline conditions and higher activity for nitrite reduction, as compared with a catalyst prepared by the carbonization of HNO3-treated cellulose in N-2. The electrocatalytic selectivity for nitrite reduction of the N-doped carbon catalyst (NH3) was directly related to the graphitic nitrogen functions. Complementary structural analyses by means of C-13 and H-1 ssNMR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and low-temperature N-2 adsorption were performed and provided support to the findings. The results show that directly-excited N-15 ssNMR spectroscopy at natural N-15 abundance is generally capable of providing information on N-doped carbon materials if relaxation properties are favorable. It is expected that this approach can be applied to a wide range of solids with an intermediate concentration of N atoms.

Valorization of lignin is still an open question and lignin has therefore remained an underutilized biomaterial. This situation is even more pronounced for hydrolysis lignin, which is characterized by a highly condensed and excessively cross-linked structure. We demonstrate the synthesis of photoactive lignin/Bi₄O₅Br₂/BiOBr bio-inorganic composites consisting of a lignin substrate that is coated by semiconducting nanosheets. The XPS analysis reveals that growing these nanosheets on lignin instead on cellulose prevents the formation of Bi⁵⁺ ions at the surface region, yielding thus a modified heterojunction Bi₄O₅Br₂/BiOBr. The material contains 18.9% of Bi₄O₅Br₂/BiOBr and is effective for the photocatalytic degradation of cationic methylene blue (MB) and zwitterionic rhodamine B (RhB) dyes under light irradiation. Lignin/Bi₄O₅Br₂/BiOBr decreases the dye concentration from 80 mg L⁻¹ to 12.3 mg L⁻¹ for RhB (85%) and from 80 mg L⁻¹ to 4.4 mg L⁻¹ for MB (95%). Complementary to the dye degradation, the lignin as a main component of the composite, was found to be efficient and rapid biosorbent for nickel, lead, and cobalt ions. The low cost, stability and ability to simultaneously photo-oxidize organic dyes and adsorb metal ions, make the photoactive lignin/Bi₄O₅Br₂/BiOBr composite a prospective material for textile wastewaters remediation and metal ions recycling.

Core/shell quantum dots (QDs) paired with semiconductor photocathodes for water reduction have rarely been implemented so far. We demonstrate the integration of ZnSe/CdS and CdS/ZnSe QDs with porous p-type NiO photocathodes for water reduction. The QDs demonstrate appreciable enhancement in water-reduction efficiency, as compared with the bare NiO. Despite their different structure, both QDs generate comparable photocurrent enhancement, yielding a 3.8- and 3.2-fold improvement for the ZnSe/CdS@NiO and CdS/ZnSe@NiO system, respectively. Unraveling the carrier kinetics at the interface of these hybrid photocathodes is therefore critical for the development of efficient photoelectrochemical (PEC) proton reduction. In addition to examining the carrier dynamics by the Mott–Schottky technique and electrochemical impedance spectroscopy (EIS), we performed theoretical modelling for the distribution density of the carriers with respect to electron and hole wave functions. The electrons are found to be delocalized through the whole shell and can directly actuate the PEC-related process in the ZnSe/CdS QDs. The holes as the more localized carriers in the core have to tunnel through the shell before injecting into the hole transport layer (NiO). Our results emphasize the role of interfacial effects in core/shell QDs-based multi-heterojunction photocathodes.

Tin(ii) oxide carbodiimide is a novel prospective semiconductor material with a band gap of 2.1 eV and lies chemically between metal oxides and metal carbodiimides. We report on the photochemical properties of this oxide carbodiimide and apply the material to form a heterojunction with CuWO4 thin films for photoelectrochemical (PEC) water oxidation. Mott-Schottky experiments reveal that the title compound is an n-type semiconductor with a flat-band potential of -0.03 V and, as such, the position of the valence band edge would be suitable for photochemical water oxidation. Sn2O(NCN) increases the photocurrent of CuWO4 thin films from 32 mu A cm(-2) to 59 mu A cm(-2) at 1.23 V vs. reversible hydrogen electrode (RHE) in 0.1 M phosphate buffer (pH 7.0) under backlight AM 1.5G illumination. This upsurge in photocurrent originates in a synergistic effect between the oxide and oxide carbodiimide, because the heterojunction photoanode displays a higher current density than the sum of its individual components. Structural analysis by powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) reveals that Sn2O(NCN) forms a core-shell structure Sn2O(NCN)@SnPOx during the PEC water oxidation in phosphate buffer. The electrochemical activation is similar to the behavior of Mn(NCN) but different from Co(NCN).

Lead cyanamide PbNCN was synthesized by solid-state metathesis between PbCl2 and Na2NCN in a 1 : 1 molar ratio, and its structure was confirmed from Rietveld refinement of X-ray data. Electronic-structure calculations of HSE06 density-functional type reveal PbNCN to be an indirect semiconductor with a band gap of 2.4 eV, in remarkable quantitative agreement with the measured value. Mott-Schottky experiments demonstrate PbNCN to be a p-type semiconductor with a flat-band potential of 2.3 eV vs. the reversible hydrogen electrode (RHE) which is commonly used to estimate the value of the valence band edge position. Moreover, thin films of powderous PbNCN were assembled into a photoelectrode for photoelectrochemical water splitting. On the example of p-type PbNCN, this study provides the first experimental evidence that MNCN compounds can be applied as photocathodes for reductive reactions in photoelectrochemical cells.

Oxygen evolution reaction (OER) catalysts are critical components of photoanodes for photoelectrochemical (PEC) water oxidation. Herein, nanostructured metal boride MB (M = Co, Fe) electrocatalysts, which have been synthesized by a Sn/SnCl2 redox assisted solid-state method, were integrated with WO3 thin films to build heterojunction photoanodes. As-obtained MB modified WO3 photoanodes exhibit enhanced charge carrier transport, amended separation of photogenerated electrons and holes, prolonged hole lifetime and increased charge carrier density. Surface modification of CoB and FeB significantly enhances the photocurrent density of WO3 photoanodes from 0.53 to 0.83 and 0.85 mA cm(-2), respectively, in transient chronoamperometry (CA) at 1.23 V vs. RHE (V-RHE) under interrupted illumination in 0.1 M Na2SO4 electrolyte (pH 7), corresponding to an increase of 1.6 relative to pristine WO3. In contrast, the pristine MB thin film electrodes do not produce noticeable photocurrent during water oxidation. The metal boride catalysts transform in situ to a core-shell structure with a metal boride core and a metal oxide (MO, M = Co, Fe) surface layer. When coupled to WO3 thin films, the CoB@CoOx nanostructures exhibit a higher catalytic enhancement than corresponding pure cobalt borate (Co-B-i) and cobalt hydroxide (Co(OH)(x)) electrocatalysts. Our results emphasize the role of the semiconductor-electrocatalyst interface for photoelectrodes and their high dependency on materials combination.

Conformal atomic layer deposition (ALD) technique is employed to make semi-transparent TaO_xN_y, providing the possibility to build semi-transparent oxy(nitride) heterojunction photoanodes on conductive substrates. A generalized approach was developed to manufacture semi-transparent quaternary metal oxynitrides on conductive substrates beyond semi-transparent binary Ta₃N₅ photoanodes aiming for wireless tandem photoelectrochemical (PEC) cells.